Got wrench? The Hinge Doctor® is designed to adjust new, worn or improperly adjusted hinges that cause the door to sag or drag. The Hinge Doctor® is the time saving, hinge restoration tool you have been looking for. Sagging doors are repaired in seconds!
$90.00 MSRP
PRODUCT DETAILS
The Hinge Doctor® HA1D is designed to adjust commercial butt hinges. Simply slip the Hinge Doctor® HA1D over the top hinge and turn with a wrench.
PDF Instructions Installation Video
$140.00 MSRP
PRODUCT DETAILS
The Hinge Doctor® HA2 is designed to adjust residential interior and exterior hinges. Simply slip the Hinge Doctor® HA2 "Hulk" over the hinge, tighten the Allen head bolt and rotate the Hinge Doctor® toward the door lock. Done!
PDF Instructions Installation Video
$ MSRP
PRODUCT DETAILS
The Hinge Doctor® HA2AD is designed to adjust residential interior hinges. Simply slip the Hinge Doctor® HA2AD over the top hinge and turn with a wrench. Done!
PDF Instructions Installation Video
$ MSRP
PRODUCT DETAILS
The Hinge Doctor® HA2BD is designed to adjust residential exterior hinges. Simply slip the Hinge Doctor® HA2BD over the top hinge and turn with a wrench.
PDF Instructions Installation Video
$100.00 MSRP
PRODUCT DETAILS
The Hinge Doctor® HA3D is designed to adjust commercial ball bearing hinges. Simply slip the Hinge Doctor® HA3D over the top hinge and turn with a wrench.
PDF Instructions Installation Video
$180.00 MSRP
PRODUCT DETAILS
The Hinge Doctor® HA4D is designed to adjust prison & spring hinges. Simply slip the Hinge Doctor® HA4D over the top hinge and turn with a wrench.
PDF Instructions Installation Video
$180.00 MSRP
PRODUCT DETAILS
The Hinge Doctor® HA7 is designed to adjust commercial spring hinges. Simply slip the Hinge Doctor® HA7 over the top hinge and open the door until 5 or 6 inches past the point of resistance. Test your results and continue this process until the top vertical edge of the door stops rubbing the door frame or the door latch goes into the door strike hole smoothly.
PDF Instructions Installation Video
$ MSRP
PRODUCT DETAILS
The Hinge Doctor® HA2X2D SET includes (1) HA2AD & (1) HA2BD Hinge Doctor® and is for residential applications.
PDF Instructions Installation Video
$ MSRP
PRODUCT DETAILS
The Hinge Doctor® HA2X3D KIT includes (1) HA2, (1) HA2AD & (1) HA2BD Hinge Doctor® and is for residential applications and “Timely” door frames.
PDF Instructions Installation Video
$296.00 MSRP
PRODUCT DETAILS
The Hinge Doctor® HA1–3D KIT includes (1) HA1D, (1) HA2 & (1) HA3D Hinge Doctor® and is for commercial and residential applications.
PDF Instructions Installation Video
$296.00 MSRP
PRODUCT DETAILS
The Hinge Doctor® HA1&3D SET includes (1) HA1D and (1) HA3D Hinge Doctor® and is for commercial applications.
PDF Instructions Installation Video
$334.00 MSRP
PRODUCT DETAILS
The Hinge Doctor® HA134D KIT includes (1) HA1D, (1) HA3D & (1) HA4D Hinge Doctor® and is for commercial and institutional applications.
PDF Instructions Installation Video
$458.00 MSRP
PRODUCT DETAILS
Our most popular kit, the Hinge Doctor® HA1–4D KIT includes (1) HA1D, (1) HA2, (1) HA3D & (1) HA4D Hinge Doctor® and is for commercial, institutional and residential applications.
PDF Instructions Installation Video
$458.00 MSRP
PRODUCT DETAILS
The complete kit, the Hinge Doctor® HA1–6D KIT includes (1) HA1D, (1) HA2, (1) HA3D, (1) HA4D, (1) HA2AD, & (1) HA2BD Hinge Doctor® and is for commercial, institutional and residential applications.
PDF Instructions Installation VideoReplace stripped out hinge and strike plate screws in residential and commercial doors and frames with our oversized hinge screws.
$30.00 MSRP
$50.00 MSRP
PRODUCT DETAILS
A No.9 Phillips under cut head with a No.11 oversized body. Replace stripped out hinge and strike plate screws in residential wood doors and frames.
$30.00 MSRP
$50.00 MSRP
PRODUCT DETAILS
A No.9 Phillips under cut head with a No.11 oversized body. Replace stripped out hinge and strike plate screws in residential wood doors and frames.
$30.00 MSRP
$50.00 MSRP
PRODUCT DETAILS
A No.9 Phillips under cut head with a No.11 oversized body. Replace stripped out hinge and strike plate screws in residential wood doors and frames.
$30.00 MSRP
$50.00 MSRP
PRODUCT DETAILS
A No.9 Phillips under cut head with a No.11 oversized body. Replace stripped out hinge and strike plate screws in residential wood doors and frames.
$30.00 MSRP
$50.00 MSRP
PRODUCT DETAILS
A No.9 Phillips under cut head with a No.11 oversized body. Replace stripped out hinge and strike plate screws in residential wood doors and frames.
$6.00 MSRP
$30.00 MSRP
$50.00 MSRP
$ MSRP
PRODUCT DETAILS
A No.12 Phillips under cut head with a No.14 oversized body. Replace stripped out hinge and strike plate screws in commercial wood doors and frames.
$6.00 MSRP
$30.00 MSRP
$50.00 MSRP
$ MSRP
PRODUCT DETAILS
A No.12 Phillips under cut head with a No.14 oversized body. Replace stripped out hinge and strike plate screws in commercial wood doors and frames.
$6.00 MSRP
$30.00 MSRP
$50.00 MSRP
$ MSRP
PRODUCT DETAILS
A No.12 Phillips under cut head with a No.14 oversized body. Replace stripped out hinge and strike plate screws in commercial wood doors and frames.
$6.00 MSRP
$30.00 MSRP
$50.00 MSRP
$ MSRP
PRODUCT DETAILS
Self-drilling, self-taping No.14 screws with No.12 Phillips undercut flat head. Replace stripped out hinge, strike plate and door closer screws in steel doors and frames.
$50.00 MSRP
$ MSRP
PRODUCT DETAILS
Self-drilling, self-taping No.14 screws with No.12 Phillips undercut flat head. Replace stripped out hinge, strike plate and door closer screws in steel doors and frames.
$6.00 MSRP
$30.00 MSRP
$50.00 MSRP
$ MSRP
PRODUCT DETAILS
Self-drilling, self-taping No.14 screws with No.12 Phillips undercut flat head. Replace stripped out hinge, strike plate and door closer screws in steel doors and frames.
$6.00 MSRP
$30.00 MSRP
$50.00 MSRP
$ MSRP
PRODUCT DETAILS
Self-drilling, self-taping No.14 security screws with No.12 Phillips undercut flat head. Replace stripped out hinge, strike plate and door closer screws in steel doors and frames.
$ MSRP
PRODUCT DETAILS
Our complete set of residential and commercial hinge screws. Includes (10) HSP10WSABR, (10) HSP10WB, (10) HSP10MB, (10) HSP10WSBBR, (10) HSP10M, (10) HSP10W, (10) HSP10WSOBR, (10) HSP10MS - SHORT, (10) HSP10WYZ, (10) HSP10WSSBR, (10) BRACKET METAL SCREWS FOR ADD1, (2 Sets) B1 SCREW PACK, (10) HSP10WSSNR, (75) FACEPLATE SCREWS - DARK BRONZE, (10) EXPANSION SCREWS, (10) #6 METAL SCREW FOR BRIDGE, (75) FACEPLATE SCREWS - STAINLESS STEEL, (10) EXPANSION SCREWS
$ MSRP
PRODUCT DETAILS
For use with FPRA, FPFA & FPBA blank faceplates.
$ MSRP
PRODUCT DETAILS
For use with FPRD, FPFD & FPBD blank faceplates.
$ MSRP
PRODUCT DETAILS
The 24 inch MEGA Screwdriver / Impact Driver has the power to break rusty and corroded screws loose and remove them with ease. Features a non-slip handle grip, impact slider and a quick change chuck that allows the use of any standard quick change bit.
$ MSRP
PRODUCT DETAILS
Set includes (1) handle and (1) shank that can be configured in two different ways.
$ MSRP
PRODUCT DETAILS
Kit includes the mini driver set plus 29 individual driver bits.
Remove old hardware and cover up unsightly cylinder and lock mounting holes, install new MS locks or replace stripped out MS lock mounting screws on storefront doors in as little as five minutes.
$ MSRP
PRODUCT DETAILS
The B15 Adapter Master Tool Kit includes (4)B15 Bridges, (4)B14ADP Bridge Adapters, (1)B15ADPT Bridge Adapter Install Tool Kit, (1) SK1 Spanner Key used for installing B15 Bridges and (1) Assorted Screw Pack with Shims
$ MSRP
PRODUCT DETAILS
Our MDHA hinge bracket alignment bar is one of our newest products and is used for repairing bent hinge brackets on hollow metal doors. It can also be used for holding the hinge bracket. It comes in either 4.5" or 5.0" size.
$11.00 MSRP
PRODUCT DETAILS
All it takes is a twist of the special key to snap the Bridge® into an aluminum framed, narrow stile storefront door. Done in about 10 seconds and ready to accept an MS lock deadbolt, dead latch or a faceplate. Works on beveled, flat and radius stiles.
PDF Instructions Installation Video
$ MSRP
PRODUCT DETAILS
The Bridge Adapter gives support to the GKL Bridge® in medium & wide storefront door stiles.
$ MSRP
PRODUCT DETAILS
The Bridge Adapter Installation Tool is made from high grade plastic & aluminum.
$ MSRP
PRODUCT DETAILS
Use this pocket-sized tool to install the Bridge® or any hole filler discs.
PDF Instructions Installation Video
$ MSRP
PRODUCT DETAILS
For faceplate installation on storefront doors when fitting with a panic bar or exit device. Includes 3 snap-in Bridges®, 2 blank faceplates (beveled and radius), screws, shims to adjust faceplate height, 1 ADD2A hole filler disc kit and brackets to convert kit to ADD1A disc kit.
PDF Instructions Installation Video
$ MSRP
PRODUCT DETAILS
For faceplate installation on storefront doors when fitting with a panic bar or exit device. Includes 3 snap-in Bridges®, 2 blank faceplates (beveled and radius), screws, shims to adjust faceplate height, 1 ADD2D hole filler disc kit and brackets to convert kit to ADD1D disc kit.
PDF Instructions Installation Video
$ MSRP
PRODUCT DETAILS
For lock installation on storefront doors when installing new MS locks or replacing stripped out MS lock mounting screws with GKL Bridges®. Includes a spanner key, 4 snap-in Bridges®, screws and shims. (2 optional screws are included for each Bridge® for additional stability and holding power if needed)
PDF Instructions Installation Video
$ MSRP
PRODUCT DETAILS
Slip the bracket into the hole and tighten the disc with the handy SK1 spanner key. Discs are 1 5/8” in diameter. Includes two discs, two brackets and two screws.
PDF Instructions
$ MSRP
PRODUCT DETAILS
Slip the bracket into the hole and tighten the disc with the handy SK1 spanner key. Discs are 1 5/8” in diameter. Includes two discs, two brackets and two screws.
PDF Instructions
$ MSRP
PRODUCT DETAILS
Simply screw the two discs onto the threaded rod. Discs are 1 5/8” in diameter. Includes two discs and one threaded rod.
$ MSRP
PRODUCT DETAILS
Simply screw the two discs onto the threaded rod. Discs are 1 5/8” in diameter. Includes two discs and one threaded rod.
$ MSRP
PRODUCT DETAILS
Slip the bracket into the hole and tighten the disc with the handy SK1 spanner key or screw the two discs onto the threaded rod. Discs are 2 5/8” in diameter. Includes two discs, two brackets, two screws and one threaded rod.
$ MSRP
PRODUCT DETAILS
Slip the bracket into the hole and tighten the disc with the handy SK1 spanner key or screw the two discs onto the threaded rod. Discs are 2 5/8” in diameter. Includes two discs, two brackets, two screws and one threaded rod.
$ MSRP
PRODUCT DETAILS
Custom blank faceplates cover the cavity left by a lock removal when fitting the door with a panic bar or exit device.
$ MSRP
PRODUCT DETAILS
Custom blank faceplates cover the cavity left by a lock removal when fitting the door with a panic bar or exit device.
$ MSRP
PRODUCT DETAILS
Custom blank faceplates cover the cavity left by a lock removal when fitting the door with a panic bar or exit device.
$ MSRP
PRODUCT DETAILS
Custom blank faceplates cover the cavity left by a lock removal when fitting the door with a panic bar or exit device.
$ MSRP
PRODUCT DETAILS
Custom blank faceplates cover the cavity left by a lock removal when fitting the door with a panic bar or exit device.
$ MSRP
PRODUCT DETAILS
Custom blank faceplates cover the cavity left by a lock removal when fitting the door with a panic bar or exit device.
$ MSRP
PRODUCT DETAILS
These sturdy painted aluminum covers are used to provide mail slot security. Installation is simple and assured. Each mail slot cover comes with a convenient paper template to insure a proper fit. Metal templates are also available.
$ MSRP
PRODUCT DETAILS
These sturdy painted aluminum covers are used to provide mail slot security. Installation is simple and assured. Each mail slot cover comes with a convenient paper template to insure a proper fit. Metal templates are also available.
$ MSRP
PRODUCT DETAILS
Metal template for use with mail slot covers MSCA and MSCD.
$ MSRP
PRODUCT DETAILS
The complete set for faceplate installation on storefront doors when fitting with a panic bar or exit device.
$ MSRP
PRODUCT DETAILS
$ MSRP
PRODUCT DETAILS
$ MSRP
PRODUCT DETAILS
Includes (1) aluminum paint pen and (1) dark bronze paint pen.
$ MSRP
PRODUCT DETAILS
Tray assembly that temporally affixes to an existing door by way of an integrated clamping system. Catches falling debris that occurs when drilling holes, holds hand tools and much more!
Installation Video
$ MSRP
PRODUCT DETAILS
The PW1 pivot wrench is for adjusting the bottom offset pivots on most storefront doors.
$ MSRP
PRODUCT DETAILS
The GS lock protector prevents moisture and dirt from entering the key way.
$ MSRP
PRODUCT DETAILS
The GS lock protector prevents moisture and dirt from entering the key way.
$ MSRP
PRODUCT DETAILS
The GS lock protector prevents moisture and dirt from entering the key way.
$ MSRP
PRODUCT DETAILS
The GS–SPCR KIT includes two spacers and is for use with long mortise and rim cylinders.
$ MSRP
PRODUCT DETAILS
Save your back and install doors in a snap with our Door Lifter. Place the Door Lifter beneath the door and easily lift the door into position by simply stepping on the lifter handle. Never leave the shop without it.
$ MSRP
PRODUCT DETAILS
$ MSRP
PRODUCT DETAILS
$ MSRP
PRODUCT DETAILS
Easily secures Herculite doors. This "emergency" door lock installs in minutes for late night door lock-up. A quick fix for failed Herculite door locks or any out–swinging doors.
PDF Instructions
$ MSRP
PRODUCT DETAILS
The Hole Saw Alignment Guide enables you to re-bore an existing 1.5” diameter hole and turn it into a 2-1/8” diameter (or larger) hole without the use of plywood, “C” clamps, measuring centers or drill fixtures. Hole saw not included.
$ MSRP
PRODUCT DETAILS
Spreader wedge for regular and continuous hinges.
$ MSRP
PRODUCT DETAILS
The MGF1 features a powerful magnet at the front tip which allows you to hold and retrieve small metal objects with precise control.
$ MSRP
PRODUCT DETAILS
The MGF2 features a powerful magnet in the tip which allows you to hold and retrieve small metal objects with precise control.
$ MSRP
PRODUCT DETAILS
The MGF3 is a lightweight glove designed for the user who prefers the feel of a slightly thinner glove that provides maximum dexterity.
